Pipe Belt Roller
It is usually 6 rollers in one group to make the belt folded, so that the material that the belt carrying is not running everywhere in the open air. This way can protect the environment, so the roller is environment friendly.
Why we make plastic pipe belt roller not metal roller?
The plastic roller is abrasive resistant, in case it is were out, it will not tear the belt, so it will protect the belt. If it is metal roller, if it is were out or rust, the roller will damage the belt. Below are the features for the plastic roller.
1. Dust-proof and waterproof make the roller fit for the bad conditions with open air and much dust.
2. Corrosion resistant--this is the advantage of plastic material, it is resistant for acid, alkali and salt.
3.Comparing with metal roller, the plastic is very light and easy installation. The roller is usually used in open air, it is very far to deliver the rollers to the using site. If the roller is very weight, it is difficult to deliver the roller.
4.Environment friendly.
Technical Parameter
Outside diameter run out of roller: 0.5-0.7mm
Revolving resistance of roller: 3.3-3.5 N
Linear velocity: 9m/s
Applied in temperature: ≤ 80℃
